19 March 2017

Pretty Sparks



This is Marv cutting a piece of titanium tubing to create an expansion chamber for his home-built solvent-trap suppressor for his SBR.

The choice of titanium is to be both a spacer for the first expansion chamber and as a liner to protect the aluminum body from the effects of the muzzle blast from a 10.5" barrel and 5.56x45mm ammo.

For the nitpickers, yes he's got an approved Form 1 for both the carbine and this sound snuffer.

2 comments:

  1. Careful how hot he gets that stuff when cutting it. It takes some doing to get it there but once it catches fire there's not much putting it out.

    ReplyDelete
    Replies
    1. Surprisingly, we knew that. He did it in little nibbles.

      Delete

You are a guest here when you comment. This is my soapbox, not yours. Be polite. Inappropriate comments will be deleted without mention. Amnesty period is expired.

Do not go off on a tangent, stay with the topic of the post. If I can't tell what your point is in the first couple of sentences I'm flushing it.

If you're trying to comment anonymously: You can't. Log into your Google account.

If you can't comprehend this, don't comment; because I'm going to moderate and mock you for wasting your time.