I'm a big fan of 6.8, I think that it is clear from some of my prior postings.
I was an early adopter of the SPC II chamber and 1:11 rifling.
I am saddened to see a "you must do it like we did it" mentality setting in at the 6.8 forums.
I was thinking that a 14.5" barrel carbine gas system gun would be kinda neat. My original plan was a what-if the Army had adopted the 6.8. Maybe even a 10.5" gun in a retro configuration.
I asked about where I could find such a thing.
I was told that I didn't want what I was asking for and that the "6.8 crowd" preferred a mid-length gas system. Yeah, I know that we do. I thought I was part of the "6.8 crowd". I also apparently want a 12.5" barrel, 4-rail handguards, expensive optics and a shopping list of stylish things.
I am frustrated that I didn't ask, "what would you build?" I asked about at 14.5"barrel in maybe an M4 profile.
I already have two middy guns in 6.8. What I want is something different from those two guns.
Since they were of no help I went looking for barrels on my own. Several makers do make a 10.5" tube. What nobody seems to consider worth doing is putting enough seat area for a normal front sight base. Barrel maker after barrel maker and it's the same story: a short seat area of less than an inch for a low profile gas block.
SIGH.
I don't like front sights mounted to the rails which is what I have to have if I go with such a barrel.
I know what I want to do. I will accept advice as to why that's a really bad plan so that I can decide if that piece of data matters to me. I will not accept a blanket statement, "you don't want to do that." I don't? WHY? It's entirely possible that your objection will not matter to my project. The SBR shorty is intended as a toy, not a tool. I have a damn nice tool of a 6.8 AR; that would be Dottie.
What I want is a short AR in 6.8. Conventional front sight base. Carbine gas system.
http://www.yorkarms.com/receiver_preorder.html
ReplyDeleteTalk to Wally. He can probably build you EXACTLY what you want for a reasonable price.
Just the question is how backed up on orders he is.
Drop him an email.
Humpf!
ReplyDeleteNo offense to Wally, but since the AR is a lego gun _I_ can build anything I need. I just need to find the damn barrel I want rather than the barrel I am being told I want.
If he can cut and recrown a barrel, I might make use of him to shorten my 16" middy barrel to 12.5" and modify an A1 birdcage flash-hider to be useable with 6.8. The barrel profile precludes using the more standard 5/8-24 threads, so 1/2-28 would have to do, but the opening on the flash-hider is too small. Hogging that out would let me get the hider I want to use for looks. I think the gas port needs opened up a little bit too. I'd have exact numbers when I rang him up for a quote.
Spikes seems to carry a 10.5" 6.8 Lothar Walther barrel that will fit the bill.