21 May 2021

Perfect! Ship It!

 

This was an attempt at printing the tail, fins up.

JT is disappointed but noticed that this filament is not behaving as well as the original brand he had.

It would appear that the Creality CR-10 doesn't care for Hatchbox filament but does like Overture brand.

A couple of reviewers agree with this assessment, especially with recent purchases; they indicate that something has changed at Hatchbox in the past few years.

2 comments:

  1. Hmmm… looks like a layer adhesion issue.

    But, without knowing exactly what settings are used, my normal suggestions are bump up your extrusion temperature, more walls vs high infill %, and/or bump up the Flow/ extrusion multiplier a bit.

    Maybe he could post his Settings?

    Of course it could just that the filament just sucks.

    But I've had some great results from the cheapest $10 a kg PLA.

    ReplyDelete
    Replies
    1. He's discovering all the things he did wrong in setting up AND in shutting down from his first initial prints. He's got some parts gummed up from improper post-op cleaning.

      Delete

You are a guest here when you comment. This is my soapbox, not yours. Be polite. Inappropriate comments will be deleted without mention. Amnesty period is expired.

Do not go off on a tangent, stay with the topic of the post. If I can't tell what your point is in the first couple of sentences I'm flushing it.

If you're trying to comment anonymously: You can't. Log into your Google account.

If you can't comprehend this, don't comment; because I'm going to moderate and mock you for wasting your time.