I have a Magpul MS3 Sling that often resided on Dottie, but normally sat in the closet.
At one time I had three of my guns configured for it, and Dottie was the only for a while.
Now Olive is configured for it with the addition of QD sockets in the provided holes of the KP-15 lower.
I have a socket on both side by combining a Magpul Type 1 (passenger) and Type 3 (driver) QD socket with a washer to give more stand-off on the Type 1 side.
KE Arms makes their own version of this socket, but only allows for single side mounting. Which is fine for 95% of the time, but occasionally it's handy to hang it from the passenger side socket because it hangs just a little different.
To me, the whole point of this QD thing is to be able to rapidly reconfigure it. And idea that the MS series of slings supports.
Also KE Arms charges too much for shipping!
PS the Type 3 was a deeper version of the Type 2 socket that has threads in it. The Type 1 and Type 2 are the same depth with the 2 being threaded and the 1 having just a hole. The Type 3 has been discontinued. To make this work with parts you can still get, use a Type 1 and 2 as shown in the instructions with a washer under both sockets and using the appropriate screw as needed.
No comments:
Post a Comment
You are a guest here when you comment. This is my soapbox, not yours. Be polite. Inappropriate comments will be deleted without mention. Amnesty period is expired.
Do not go off on a tangent, stay with the topic of the post. If I can't tell what your point is in the first couple of sentences I'm flushing it.
If you're trying to comment anonymously: You can't. Log into your Google account.
If you can't comprehend this, don't comment; because I'm going to moderate and mock you for wasting your time.