30 November 2022

Well That Sucks

I just found out...

Atlanta Dragway in Commerce, Georgia closed in May 2021 and they're tearing it down.

Marv used to head up there every November to do the Southern Super Heavy Shootout.

Alas, it is no more!

ArachnoThag

Transhuman Space has corpsicles.

That means if you've the means, you can bridge the time difference from today to be alive in 2100.

I'd be a "mere" 131 years old!

My scenario is that I win the lottery big time then invest in the Apple of the next hundred years to become ludicrously wealthy.

This gives me access to the advances in medicine that lets me live long enough to take advantage of other advances and... be woken up when what might have killed you has a cure.

But something I've mentioned before about being me is an allergy to mushrooms.

Much of the food stuffs off Earth is based around fungus.

What good is it to be stupid rich if I can't go have a Mk.1 eyeball look at The Great Red Spot or that ridiculous bauble of Saturn?

This ghost is going to get a new shell!

I'm thinking something like a giant mechanical spider with a complete set of EVA gear built in!

I could be a belter!  Definitely need a bright purple synthetic hair mohawk glued to the top of my "head". 

This is probably too expensive a concept to actually play, and if I'm the GM it'd be the most literal Mary Sue ever played by a Gamemaster.

I Certainly Feel Better

Honest Outlaw left his M&P 9 2.0 Compact outside for a bit more than three months.

It doesn't appear to have hurt it functionally.

The Only One Even Close

The only "real" pistol I've bought that approached a Hi-Point in price was my Sigma SW9V.

Just a whiff more than $200 out the door.

It promptly broke.

Ultimately, it didn't cost me anything to get it fixed, because S&W went way beyond what I'd have expected for warranty care on a second hand gun.

None of this is new news.  I detailed this on this very blog as it was happening.

I got this gun on a whim.

What if I'd bought it and needed it to actually work?

That's the risk of used guns.

It's also why you should shoot your new purchase a bit before betting your life on it!

Something about this particular gun comes to mind.

Is it a rare collectable now that the SW9V slide has been factory replaced with one from an SD9VE?

It Comes With Sufficient Magazines


 

I will give Palmetto State Armory props for including enough magazines with their Dagger pistol.

At an impressive price too.

Threshold

The threshold between pi and pi- damage in GURPS for .30ish caliber is somewhere between the 1,990 ft/s of .30 Carbine in an M1 Carbine (4d+1 pi) and the 1,600 ft/s of 7.62x25mm Tokarev in a PPSh-41 (3d pi-).

The 1,250 ft/s of .30 Super Carry from a 4" test barrel (2d+2 pi-) is far below this threshold.

Plan your character accordingly.

29 November 2022

Anti-Hi-Point

If the Hi-Point is the cheapest example of a gun that reliably sends lead down range, there's an opposite end of the spectrum...

There's many guns that cost far more than the average Glock (also known for being ugly and boringly reliable) which offer nothing over the more prosaic guns.

Honest.

I am not sure I should name names... but how many times have you heard something like, "The best $600 pistol you can get for $1,100!"

There's a lot of that out there.

What distinguishes one pistol from another besides the logo on the side?

They all go bang most all the time.

Most of them are accurate enough for social situations.

They are all available in a suitable chambering.

You can even choose a size and capacity from a list of options.

It was an accident of fate that put me into Smith and Wessons after a long association with Colt and Glock.  (Another thank you to Willard for pushing me over the brink!  Though FuzzyGeff gets some credit here too.)

In a lot of cases it boils down to whether you want a safety or not.  Glock, no.  M&P, if you'd like.

Now there's even a choice between plastic polymer and metal for the frame with some models!  Though you pay some extra tariff for something that's not hydrocarbon based.

The world is your oyster for pistol selection!

Especially if you are willing to buy used.  There are some stupid good deals out there in guns that used to be owned by a police department.

Hi Point

Something that's true about Hi Points:  They go bang.

They go bang as often as guns costing a LOT more.

They're simple.  There ain't much to go wrong, and what there is rarely does.

If you don't have much money and want a gun that goes bang in a readily available caliber, you aren't going far wrong with one.

There's many Youtubers who've tried, and failed, to kill one.

With that said, I don't own one and won't own one.

I think they're ugly and they don't interest me at all.

But that's a subjective reason to not get one.

Wandernde Null

Anyone remember in the way-back when Germans were saying that once their G36 got hot, the zero shifted and they started to miss?

The German government investigation moves slow, but grinds fine.

Random sampling of rifles reveals no change of zero in the guns in the inventory.  This was also noticed by many gun bloggers shooting their semi-auto clones, but the semi-auto clone might not meet the same specifications as guns for the Heer.

These same rifles all met the accuracy standard required of the specification, which is on par with other 5.56 battle rifles.

At the end of the day it turns out to be a training issue and not a weapon issue.

To the point of not being certain that rifles going into combat being zeroed at all.  !!!

But the real issue is the Germans not getting training that let them react constructively to incoming fire then blaming their poor response on the tools at hand.

PS:

If someone can find the article I read, I'd appreciate it.  It was in German and I read it translated by Google.  It was published this year amid the debates about actually spending the money to replace them.

My search history got wiped when I forgot to isolate it from CCleaner...

PPS:

It's the gun!  No it isn't!  Yes it is!  Nuh uh!  Uh huh!  Repeats in several cycles around this gun in the German media too, so this latest "revelation" could be just another cycle.

How Many Pounds Draw

In GURPS bows and crossbows are rated in terms of ST.

You have to be as strong or stronger than the rated ST of the bow to get it to full draw and get the stated stats.

Because of the way the arms store and release energy, the partial draw of a lower ST will not give the performance of that lower ST.

Douglas Cole has made a formula that translates ST to lbs.

Bow draw = 0.5 x ST^2 

So...

98# bow is ST 14
128# bow is ST 16
144# bow is ST 17
180# bow is ST 19

A ST 10 bow would be a mere 50# 

You can revers the formula too.

ST=(2 x draw)^(1/2)

So a gym class 35# fiberglass recurve bow is a ST 8 bow.

A Hearty Thank You

That Fucker Fleetwood has purchased a gun.

He has refused to divulge the identity of this gun.

His accomplice, Marv, has been sworn to keep the identity of this gun secret.

When confronted about why it was a secret and if it was for a surprise or from shame, That Fucker Fleetwood, indicated shame.

Further waterboarding grilling questions have eliminated Heckler & Koch.

Hi-Point has NOT been ruled out.

So I've been singing, in Kindergarten cadence, "Willard bought a Hi-Point!" over and over.

While I'm not really expending much energy to the mystery, for some reason it's really tickled my amusement button.

So, thank you, Willard, for providing me this welcome distraction from wrenching on the car!

Victory

Wheel hub is replaced.

Test drive reveals no odd smells, vibrations or noises.

We're cautiously optimistic that this fixed the proximate problem.

28 November 2022

Just The Tip

I took a bunch of pics of my Zombie Green™ dyed PMAGs to try to show what they looked like to someone on Arfcom.

One pic delighted me, so I'm sharing here!



Nawt Vidja Gaims

The games that I've been posting about are table top role playing games, not video games.

In fact, calling any video game a "role playing game" is utter poppycock!

The playing the role part is the same use of the word as an actor playing a role.

Video games don't have that.

You move a playing piece around the sand-box, you don't play a role.

And The Horse You Rode In

Got Moxie apart!


The old hub shown with hub removal tool.

Despite all signs pointing to the wheel bearing, it's possible that the RF caliper piston is hanging up a bit.  It didn't want to squeeze back into it's bore at all.

That'd be odd since it wasn't pulling to the side at all and there was none of the obvious stuck caliper smell.  It's an unmistakable smell!

I'll put the new hub in and see if the problem is fixed.  If not, $75 and a short road trip from now, I can have a new caliper.

25 November 2022

Bug Hunt

I just remembered I have a ton of shit for 2300 AD too.

That should be an easy conversion to GURPS too because it's mostly in real units and the tech is hard sci-fi except for the stutterwarp FTL drive.

Then there's stranger science fiction like converting Star Frontiers.  That's really D&D in space without the magic.  Not a very compelling world, but the tech is hard science enough to be understandable without a lecture.

Lots of options out there for space.

All three of you players are reading this, how's about some input in the comments!

-> <- This Close

FuzzyGeff will be down and I wanna do some gaming!

We've already got characters for Traveller: Interstellar Wars, but I noticed that the stacks of miracle technology was causing some problems with Marv.

There's some intuitive implications of that tech to his character that aren't intuitive to the player.

If we want to stick with science-fiction and space, there's Transhuman Space.

That's hard, crunchy, science-fiction set in the not too distant future.

I am not near so familiar with the setting as Traveller, but it lacks the filling a thimble from a firehose effect I've been doing with Interstellar Wars.

Marv would have to state a preference.

Twilight: 2000 I can do at the drop of a hat.  It, at least, has a simple start and is easily comprehended.

A throw-together fantasy world has also worked well, but not sure what interest there is among my seasonal and tiny group.

Fantasy Old-West is something I've got ready because I've got my world for my novel already in GURPS terms.  This is also an easy setting to explain, and since it's based on the white folks exploring on the other side of the spook-hole, there's not a lot of background they have to be taught that their characters should know that their players won't.

Gun Nerding

Watching the miniseries prequel to Yellowstone, 1883, and I spotted something I would not have noticed even a few years ago.

Sam Elliot's Colt revolver has post-1896 features.

Half moon ejector and push-button cylinder pin latch being what I noticed.

It's not ruining my enjoyment, it's just interesting that I noticed.

24 November 2022

I Know What I Plan On Doing

Diabolical Canadian, James Cameron, has stated that Avatar 2 will require two billion dollars at the box office to break even.

Further, he says that if it doesn't make money, he will not make any more Avatar films.

It is, therefore, our sacred duty to not pay to see this film.

No more Spacecahontas / Dancing With Nantangs!

Thanks!

While 2022 has been a shit show in a lot of ways...

I am alive.  After ramming that tree in The Precious there was some realization that it could have gone the other way.

The Lovely Harvey is making excellent progress recovering from breaking her shoulder.

We were missed by Ian.

There's a roof over my head and food in the pantry.

I have the best friends.  That cannot be overstated.

Almost Worse

Been researching gas masks for my T2K conversion.

An alarming number of filters in the cold-war era use stuff like asbestos, or worse.

Hurray!  You don't die from inhaling that chemical agent!

But you die from mesothelioma later on.

It's the kind of thing the evil T2K GM keeps track of to ruin a long-running character's day when they've successfully managed to settle in and get rebuilding society good and established.

Reawakened

Watching Peaky Blinders has reawakened a want for a Webley.

Not too strong, mind, but still there.

I was once fascinated with British firearms and amassed quite a collection before the muse left me and I disposed of them.

Only the SMLE Mk.III* remains of that, but I never got a Webley.

The lack of ammo dissuaded me back in the early '90's when I was accumulating.

Actually, I think that's true again!  There's no ammo readily available now, but for a different reason.

23 November 2022

Or Perhaps Not

Nine years ago I was thinking that you could use magic to get around heating up the metal to make a good quality sword.  "Good" being the default GURPS weapon quality.

I am thinking that shape metal, while it would mix things up to get the correct percentages of impurities to make iron into a steel; it would not give the crystalline structure required.

So you're still going to have to heat it up.

But magic would certainly allow you to make your initial block with the correct proportions.

CHUNK CHUNK CHUNK

I cannot say I wasn't expecting it.

I bought the parts almost a year ago.

The wheel bearings in Moxie were going bad last year.

I'd already done three of them...

RF decided to do more than give a warning whine today.

With a wheel shaking "chunk chunk chunk" as we limped her home.

Whelp.  Got some work to do now.

I hate how these things fight coming out of the knuckle.

22 November 2022

Harnessing Photons

I'm embarking on adding fog lights to The Beast.

Tonight I tested the lights and harness I bought.


The problem here is the G8 headlight switch grounds the lead rather than connects it to 12v as the harness expects.

Prolly an easy fix for this.

Even if I have to replace the relay part of the setup, the price of the harness was essentially the same as the two plugs for the H10 bulbs in the light housings.

Small Arms Protective Inserts

SAPI stands for small arms protective inserts.

While checking to see what the NIJ rating was for them, I found they have their own rating system.

Based on the verbiage, they're all semi-ablative protection.

SAPI is supposed to stop 7.62x51mm, 7.62x54mmR and 5.56x45mm ball.

ISAPI adds the ability to stop 7.62x39mm 57-BZ-231 API.

ESAPI (rev A-E) adds being able to stop .30-06 M2 AP.

ESAPI (rev G and J) adds 5.56x45mm M995 AP.

XSAPI adds 7.62x51mm M993 AP.

That means that SAPI is good for 7d+1 pi, or DR 25.

To stop 7.62x39mm API's 3d+2(2) pi inc you need 23, but since it still has to stop the 7d+1 pi of 54R, it's still 25.

We know from NIJ IV you need DR 35 to stop M2 AP.

In GURPS terms M995 and M993 aren't any better than M2 AP, so still DR 35.

So:

SAPI and ISAPI are DR 25 semi-ablative.

All revisions of ESAPI and XSAPI are DR 35 semi-ablative.

That was easy, right?


Meanwhile North Of The Border

It would appear that Canada is poised to ban all semi-auto rifles and shotguns.  Or at least most of them.

Linky

I wonder how many snowbirds will be staying down here after this.

CD Eject

The Australian sourced radio in The Beast has a neat feature where you can rip a CD-A disc into flash memory on board the radio.

I only have 2 of 15 discs ripped at the moment...

So I ejected The Boy's favorite MP3 disc and tried to insert a new disc.

It ejected, but the "there's a CD loaded" icon still appeared on the radio.

UGH.

Forcing a CD into the slot anyways would still eject the rest of the way, but wasn't being accepted.

I repeated this a couple of time and hit the slot with some canned air and it eventually started registering that the CD was absent when it ejected.

Must be a stick pawl or something inside the box.

All is well... for now.

I Think I Found Them All

Let's hear it for back-ups!

When the Drobo died, it took out a few large files.

I thought I still had them because their names were in the directories where they were supposed to be, but I found a few of them that wouldn't open.

While trying to figure out why, I noticed they were 0kb instead of a few mb in size.

Dammit.

Something went wrong moving them from one drive to another, I guess.

Happily, for most of them I have more than one copy and they 0kb was replaced with a known good.

The couple I was short, they were readily recovered from off-site sources.

Still Dead

Like Franco, John F Kennedy is still among the daisy pushing set.

Happened before I was born, so I don't really get into the mystique.

I still wonder, though, what he knew about the Clintons.

Bigger Wrench

Going to embark on doing the inner tie-rods on The Beast soon.

I discovered that I don't have a big enough wrench.

The flats appear to be 32mm.

I don't even have a Crescent® Swedish key adjustable wrench that's big enough.

Looks like a trip to one of the stores carrying the new inner to get a wrench and hoping that the one on the car is the same size.

Prolly get the correct size wrench AND a new crescent wrench that will go big enough.

The best news is that the placement of the rack is such that I can get a wrench on it and don't have to resort to one of those tube-and-adaptor socket dealies.

Something that's mildly amusing is not a single video of someone doing this is shown holding the rack with a pair of soft jaw pliers when they're taking off the inner.

The service manual says to do so.

Heck, they're not holding that thing with anything, and some are pounding that inner off too.

21 November 2022

Modern Ancient Armor

Beans left a hell of a comment!

I have not researched police and prison armor sufficiently to give him a decent answer.

But here's a couple of points...

Most of my armor ramblings are game effects, not reality effects.

At best I successfully translate a real world item into game terms in a manner which gives a believable effect in the game.

Armor is more complicated than the game stats lead you to believe most of the time.

GURPS has provision to make armor as complicated as you'd like it to be.

Does Kevlar® provide less protection against icepicks?  You can give your armor a split DR and specify a lower amount against a particular kind of attack.

An icepick would do impaling damage so you say DR 12/4* and note that the lower DR is used against imp.  Flak vests are to protect against fragmentation, which is cutting damage (cut) so the vest still does well even if it's vulnerable to a stiletto.

Pickle barrel plastic is about the same resistance as boiled leather for less weight.  Numbers could be generated once I got numbers for the mass difference.  Plastic will also require less upkeep!

Because plastic scales are lighter than leather, though, a split DR with a lower value against crushing (cr) damage might be appropriate.

Kydex® strips in a Kevlar® backing is actually modeled on ancient styles of armor; jack of plates or brigandine.  Everything old is new again!  Stats would be some increase in DR and reduction in mass from the TL2 or 4 versions.

There's more to unpack!  Especially to make stats for the modern versions.

Breaking A Subculture

When certain other blogs started tossing around the CENSORED word, I objected.

I keep saying it's culture, not genetics which is the problem.

Handwaving Freakoutery gave a succinct way of saying what I've been trying to say:

Here’s an unfortunate truth you need to process. In modern urban black culture, black boys fight. They resolve their grievances in an honor culture because they can’t trust the authority to resolve them, and honor cultures resolve differences with duels. Always have.

and how did they come to distrust authority?

You know what systemic racism is, don’t you? It’s when a law or policy that has no apparent racist intent, when applied in combination with other societal factors, produces a disproportionately bad result to a particular race.

He cites a couple of examples.

What that means is we have to regain the trust of this subculture at the same time as forcing them to abandon it and join our culture.

Bizarrely enough the way that used to be done was with something that strongly resembles racism.

It was, "If you're going to act that way, you don't get to leave your little section of town.  We catch you outside that little section acting that way, bad things happen to you."

Anyone who left that section of town and behaved in a civilized manner as a member of the wider culture, got to remain outside and take advantage of the greater opportunities afforded by being a member of that culture.

Classic carrot and stick approach.

The Irish passed through this crucible.  Twice!

Italians did it.  I remember talking to my grandfather about it.

Catholics (!) did it.

Asians did it, and did it differently from Europeans.

Blacks were well on their way of doing it when the real racists decided the make the ghetto inescapable.

Red-line laws.  Family breaking financial incentives.

Those make sure the people who can act civilized are forced to live among the barbarians, and eventually join barbarian culture to merely survive.

Lather, rinse, repeat for a couple of generations and...  Here we are!

Fixing it now will be grueling and brutal.

In the end, we get solid citizens and we do serious hurt to actual racists.

Hurting racists is good.

Red-Flag Fail

Not sure if I should point this out, but...

Red-Flag laws won't work because fifteen seconds after they were passed and gun owners read what it was, they made provisions to not be disarmed even if every gun in their house was seized and their ID flagged to keep them from buying from an FFL.

This will be used to justify registration, because without knowing about every gun someone owns, you can't be sure your red-flag seizure got all of them.

Honestly, the entire shtick of "hold still and let us fuck you because it might save one life" no longer has any weight to it.

Fucking us won't save any lives and we're very much aware of it, thankyouverymuch.

Part of the problem is assigning motivations which aren't actually present to the owning of a gun.

It's why most gun owners are familiar with the concept of projection and wonder if the people trying to ban guns are possessed of the motivations assigned to gun owners.

I'm sure you've heard a liberal acquaintance say something like, "I couldn't own a gun, I'd murder someone!"  Never phrased so bluntly, of course.

They believe that they'd murder their significant other after a fight, so that's what everyone else would do too?  Therefore anyone who's having a spat must be disarmed?

I can't speak for anyone else, but if Harvey really pisses me off, I remove myself from the situation and go for a limp or drive.  Coincidentally, leaving her with all the guns while I let the flight/fight stuff in the bloodstream run down.  In a way, I choose "flight."

At no point was anyone in any danger, even if I choose to stay and keep arguing.  Even with all the damn guns here.

I don't leave avoid harming her, I leave to break the circular nature of this kind of argument that most every couple has from time to time.

Red-Flag laws are pre-crime punishments that assume that any argument will become a fight and every fight ends with someone getting shot.

If there was even the slightest hint that someone slinging false accusations would be punished for it, perhaps I'd be more relaxed about it.

If the guns were returned with the same haste in which they were taken, perhaps I could relax about it.

Hell, even the option to "upgrade" the red-flag check to a Baker Act (Florida's specific name for an emergency involuntary commitment) might be better.  Then the person gets taken away from the pile of guns, locked up in a hospital, and evaluated to see if they're dangerous.  If not, they get to go home.  End of line, and the hospital stay is cheaper than lawyers and hearings.

But that's not on offer because they don't really want to save anyone from anything.

I Think I Found Where 2.1 Pounds Went

My M16 Stahlhelm is only 2.9 lb.

That got me to wondering.

My helmet is also a mere 0.06" (1.5mm) thick.

That's just DR 4 not the DR 6 promised in High Tech.

Change mandated by reality check noted!

20 November 2022

Body Armor Comparisons

A bog-standard USGI size-large PASGT vest covers areas 9-10 with DR 10/5* with shoulder protection of DR 9/5* for 10.1 lb.  Approximately $200.

An AR500 Testudo with Level III plates gives areas 9-10 DR 26 (DR 1 for the carrier's padded cloth and DR 25 of semi-ablative plates - Front and Back only!) for 19.4 lb.  $240.

Medieval and Renaissance armor isn't as good...

DR 9 bronze heavy plate gets you to DR 9 over areas 9-10 for 24 lb. and $12,000.

DR 10 bronze heavy plate is 36 lb. and $18,000.

At TL4 you can get a hardened steel cuirass that gives DR 10 for 24 lb. and $15,000!

Fluting without hardening is the same price and protection but 21.6 lb.

You can go all out and go with fluted, duplex heavy plate which is masterfully tailored to your body...

DR 10, 12lb.  $126,000 (better get two!)  Still not quite as good as a PASGT vest you can get at a gun show...

Of course the TL8 PASGT vest is pricier with 5 tech-level jumps to double the price each time... $6,400 using the standard system to buy one at TL3 (assuming it's available at all).  $7,680 for the Testudo...  Halve those prices at TL4.

Without special dispensations, making a modern character for a medieval world is expensive!

19 November 2022

Happy Thoughts

Just sifting through my pictures and stumbled across this one.

These are things I got from my grampa.

They are priceless to me, even if they've little value to anyone else.

Glitch

My conversion of Twilight: 2000 to GURPS started out life using MS Word from Office 95.

It got saved-as into OpenOffice, then edited with OpenOffice, NeoOffice or LibreOffice depending on what OS I was using while editing.

Recently, it's begun to show its age by showing about five pages blank.

If you close and reopen, many times the pages are restored, but it's irritating.

I might have to undertake the laborious task of retyping everything from scratch to detach from any lingering legacy formatting incompatibilities from using an ancient version of Word to start with. 

I guess that one could have worse hobbies...

More PASGT

The PASGT vest is NIJ II or IIA depending on the exact place it's hit.

That gives us DR of 9 or 10.

Because it's flexible armor, that means DR 9/5* or 10/5*.  Higher value against cutting and piercing.

I'll be generous and call it 10/5*.

My size large example tips the scales at 10.1 lb.

One of these protected me from both hatch coamings and a spent .50 Cal AP round.

Obviously, DR 10/5* is not really intended to stop bullets, but these things have been known to stop 9mm.

Let Me Ax You Something

 

Canon EOS M50, EF-S55-250mm: f/5.6, 1/320", 154mm, ISO 800

Soft focus effect from shooting through the screen door.