18 December 2022

Groovy

Marv replaced all the aiming bits on his KelTec KSG.

So he got it all zeroed for 20 yards because that's the longest range open today.

I spotted something neat on the target:

The rifling on the rifled slug is visible in the hole it punched!

3 comments:

  1. looks like one of those bore cleaner things made that hole...panzer guy...

    ReplyDelete
  2. Those are really deep grooves. I had targets a few years ago that had a really weird "spiral galaxy" looking burn marks in the holes... Really freaked me out until I figured out what was going on. Turns out Hornady V-Max bullets don't work well in a Springfield 03A3... Too thin of a jacket, and the sharp and deep grooves in the barrel were cutting the bullets through and the load I was using was pushing hot and hard enough that the lead was escaping. Needless to say accuracy was poo-poo. Switching to a more normal FMJ bullet solved the problem entirely. Also those plastic tipped bullets don't feed well in an M1 Garand. The only things I have that they work well in is the M1A (loves 'em) or the Savage 111 (shoots just about anything well).

    ReplyDelete
    Replies
    1. V-Max (and Z-Max) 168gr works GREAT in my FAL. I've never tried it in .30-06 at all. It's decent in .270 though.

      Delete

You are a guest here when you comment. This is my soapbox, not yours. Be polite. Inappropriate comments will be deleted without mention. Amnesty period is expired.

Do not go off on a tangent, stay with the topic of the post. If I can't tell what your point is in the first couple of sentences I'm flushing it.

If you're trying to comment anonymously: You can't. Log into your Google account.

If you can't comprehend this, don't comment; because I'm going to moderate and mock you for wasting your time.