25 March 2023

Firewall Back

I have the G8 headlight switch installed and wired.


I took a 12v hot-in-run wire from the abandoned in place up-fitter harness, connected it to the, also abandoned in place, siren harness.

This brings the wire through the firewall via a factory grommet and gives me a nice weather-tight plug under the hood.

Using that same siren harness I ran another wire back to the switch, added a pin to the connector and that will provide a switched ground for relay.

I temporarily connected the relay and had Harvey close the switch.  The relay clicks!

Just like it's supposed.

Next I need to extend my light harness back to where the relay will reside and connect power and ground to it.

Then we wait for fog!

No comments:

Post a Comment

You are a guest here when you comment. This is my soapbox, not yours. Be polite. Inappropriate comments will be deleted without mention. Amnesty period is expired.

Do not go off on a tangent, stay with the topic of the post. If I can't tell what your point is in the first couple of sentences I'm flushing it.

If you're trying to comment anonymously: You can't. Log into your Google account.

If you can't comprehend this, don't comment; because I'm going to moderate and mock you for wasting your time.