20 August 2019

Stymied


Got the X-pipe separated from the cats at the front end.

Loosened the clamps to the mufflers at the back end.

Yup.  Them things is stuck.

I can't get enough wiggle on them by my lonesome to get them to start walking off.

It's little things like this which are the most frustrating.

I've soaked the joint with PB Blaster in the hopes that it will work its magic and loosen them.

3 comments:

  1. PB Blaster is pretty good stuff. Much better than WD40. The only other similar product I buy anymore is Kano Kroil. Which is much slower than PB Blaster but is still great for really stubborn stuck metal.

    ReplyDelete
    Replies
    1. Kroil and heat is for when PB fails.

      Delete
    2. Absolutely correct. If Kroil + heat doesn't do it then you probably need to consider something like a sawz-all or a die grinder.

      Delete

You are a guest here when you comment. This is my soapbox, not yours. Be polite. Inappropriate comments will be deleted without mention. Amnesty period is expired.

Do not go off on a tangent, stay with the topic of the post. If I can't tell what your point is in the first couple of sentences I'm flushing it.

If you're trying to comment anonymously: Sign your work. Try this link for an explanation: https://mcthag.blogspot.com/2023/04/lots-of-new-readers.html

Anonymous comments must pass a higher bar than others. Repeat offenders must pass an even higher bar.

If you can't comprehend this, don't comment; because I'm going to moderate and mock you for wasting your time.